Key takeaways
- Inspect cable, hooks, and ratchet before every use; replace frayed or kinked cable.
- Anchor to a solid structure, such as a tree trunk with a protective strap, rather than a small branch or fence post.
- Stay out of the line of pull so a snapped line cannot hit you.
- Drape a heavy blanket or jacket over the cable to dampen recoil if it fails.
- Work in short ratchet strokes and watch the load and anchors constantly.
A come along is a hand-operated ratcheting winch used for pulling, tensioning, and dragging loads where power is unavailable. The right one has a working load limit well above what you plan to pull, a cable or strap suited to the job, and a sturdy ratchet mechanism. Always size for the working load limit rather than the larger ultimate figure.
Know the Working Load Limit
Come alongs are commonly sold by tonnage, such as 1-ton, 2-ton, or 4-ton models, but the number on the label is not the amount you should routinely pull. The working load limit (WLL) is the maximum load the tool is designed to handle in normal use, and it is significantly below the breaking strength. Never exceed the WLL, and apply a safety margin because friction, angles, and shock loads increase forces. A vehicle stuck in mud, for example, can require much more force than its weight suggests.
Use manufacturer data to match the tool to your task, and when in doubt choose one rated higher. Safety markings and clear load labels on the frame are good signs.
Cable vs. Strap vs. Chain
| Line type | Strength | Pros | Cons |
|---|---|---|---|
| Steel wire cable | High | Durable, abrasion-resistant | Can fray; needs gloves |
| Webbing strap | Moderate | Lightweight, gentle on surfaces | Cut or UV damage possible |
| Chain | High | Rugged, abrasion-proof | Heavy, less flexible |
| Synthetic rope | Moderate | Light, safer if it snaps | Abrasion and heat sensitivity |
For general farm and garage work, a steel cable is the common choice. For delicate surfaces or fence tensioning, a strap may be more suitable. Check the length: a longer line lets you work from a safer distance, but you can only pull as far as the line reaches before resetting the anchor.
Build Quality and Hooks
Look at the frame material, ratchet pawl design, and hook shape. Forged steel hooks with safety latches resist straightening under load. A smooth ratchet handle with a comfortable grip makes the work less tiring, and a release mechanism that is easy to operate under tension is safer. Coatings such as zinc plating help prevent rust. Avoid products with thin stamped parts or hooks that look bent from the factory.
A well-known category worth browsing is 2-ton come along cable pullers, which suits many garage and farm tasks. Compare the labeled working load, cable length, and hook design.
Safe Use Fundamentals
- Inspect cable, hooks, and ratchet before every use; replace frayed or kinked cable.
- Anchor to a solid structure, such as a tree trunk with a protective strap, rather than a small branch or fence post.
- Stay out of the line of pull so a snapped line cannot hit you.
- Drape a heavy blanket or jacket over the cable to dampen recoil if it fails.
- Work in short ratchet strokes and watch the load and anchors constantly.
Wear sturdy leather gloves to protect against cable burrs. Do not use a come along for lifting people or for overhead lifting unless it is expressly rated for that. Most are for horizontal pulling only, and using them for lifting can be dangerous.
Common Uses and Accessories
Typical jobs include tightening fence wire, pulling stumps or posts, moving heavy equipment onto a trailer, straightening bent components, and winching a vehicle a short distance. Accessories like a tree saver strap, shackles rated for the load, and snatch blocks that can double your pulling force expand what you can do. Use only rated hardware, and remember that each component in the chain is limited by its weakest link.
For storing the tool, keep it clean and lightly oiled. Wipe dirt from the cable and ratchet teeth, apply light oil to the pivot points, and store it in a dry place. A hard case or bag keeps the cable from tangling and protects it in the truck bed.
Buying Tips and Red Flags
Read how a listing states its capacity: some advertise ultimate strength rather than working load. Compare weights, because very light tools may use thinner parts. Check warranty terms and replacement part availability, such as cables and handles. Favor sellers that publish clear specifications and safety instructions.
If your tasks regularly involve heavy pulling, consider whether a powered winch or a different tool would be safer and more efficient. A come along is excellent for controlled, slow tension, but it is not a substitute for proper recovery gear on a heavy vehicle. When in doubt, consult a professional rigger.
Anchor selection deserves extra attention, because the best come along in the world is useless if the anchor gives way. Use a large tree, a heavy post set in concrete, or a vehicle with the parking brake and wheel chocks in place. Spread the load with a wide strap rather than a thin cable that can cut into bark. Check the angle of pull: a straight line is strongest, while sharp bends increase friction and put side loads on hooks that they are not designed to handle.
Plan your pull in stages. For long distances, reset the cable and ratchet again rather than stretching the tool to its limits. If the load stops moving, do not push harder; stop and reassess. Something may be snagged, the anchor may be shifting, or the load may exceed what the tool can safely handle. Patience is a safety feature.
Finally, keep a written note of your tool’s rated capacity near where you store it, and train anyone else who might use it. Many accidents involve improvised setups or borrowed gear used without understanding its limits.
Frequently Asked Questions
Can I use a come along to lift something?
Generally no. They are designed for pulling, not overhead lifting, unless the product states a lifting rating.
What is the difference between a come along and a winch?
A come along is a hand-ratcheted device, while many winches are powered electrically or hydraulically and designed for vehicle recovery.
How do I know when to replace the cable?
Replace it if you see broken strands, kinks, flattening, or heavy rust.
FAQ
Can I use a come along to lift something?
What is the difference between a come along and a winch?
How do I know when to replace the cable?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!